5083 h131 h116 marine grade aluminum plate sheet
1 The Introduction of 5083 Aluminum sheet
A tanker is a tank-shaped transportation vehicle used to carry various liquids, liquefied gases and powdered goods. These goods include gasoline, crude oil, various viscous oils, vegetable oils, liquid ammonia, wine, water, and various acids/alkaline liquids, cement lead oxide powder, etc.
In view of the superior performance of aluminum alloy tanker in economy, environmental protection and safety. Alloy aluminum plates have become the choice of tanker materials. Commonly used materials include 5083 aluminum plate for oil tanker, 5754 aluminum plate for oil tanker, 5454 aluminum plate for oil tanker, 5182 aluminum plate for oil tanker, and 5059 aluminum plate for oil tanker,etc.
Conventional oil tanker aluminum plates are generally within 12.5 meters in length, 2.2 meters in width, and generally 4-8mm in thickness. A complete tank body generally needs 4-6 pieces of aluminum plates to be welded together, including the tank body/Cylinder, Head and Bulkhead/Wash Board all can be made of aluminum plates. The tank body/Cylinder is an important part of the oil tanker. Generally, 5083-H32/5454-H32/5182-O/H111 aluminum plates are used. The tank Heads on both sides are 5083/5454/5182-O/H111 aluminum plates, and the tank Heads need to be bent. , O/H111 temper is softer and easier to bend. The Bulkhead/Wash Board of the tanker also adopts the 5083/5454/5182-O/H111 temper.
2 The Product specification of 5083 Aluminum sheet
* Alloy: 5083,5754,5454,5182,5059,5052 etc
* Material temper: O, H111, H112, H114, H116, H32, etc;
* Thickness (mm): 4-8mm, the normal thickness are generally: 5, 6, 7, 8mm;
* Width (mm): 1500mm-3450mm
The typical width of tanker body/Cylinder and Bulkhead/Wash Board: 1500/1600/1800/2000/2200/2400mm
* Length (mm): 500-16000mm
Typical length: 5500/5750/6000/7500/7850/8600/11800mm
* Production standards: GB/T 3880, EN14286, EN485, ASTM B209, or according to customer's special requirements
* Applicable fields:Tank trucks, various liquid, liquefied gas and powder cargo transportation vehicles,etc.
* Appearance Parameter
| Type |
Standard Plate |
High Class Plate |
Bright Plate |
Mirror Plate |
Roughness
Ra/μm |
0.5-0.8
|
0.3-0.5
|
0.1-0.3
|
≤0.04
|
Product
Description |
Smooth Surface
Defect deepness
<Minus Tolerances of Thickness |
Fine and Smooth surface
No or only very little colour aberration and chatters |
Bright,fine and smooth surface
No colour aberration and chatters |
Mirror reflective surface
Reflecance ≥86% |
| Applicable Standards |
GB/T 3880 |
EN14286/ASTM B209
EN485
Or depend on Customer's special requirements |
EN14286/ASTM B209
Or depend on Customer's special requirements |
EN14286/ASTM B209
Or depend on Customer's special requirements |
| Application |
Use directly or after brashing
Cylinder,
Head,
Bulkhead,
Wash Board |
Directly Use
Cylinder,
Head,
Bulkhead,
Wash Board |
Directly Use
Cylinder,
Head,
|
Directly Use
Cylinder,
Head,
|
3 The Chemical composition and Mechanical properties of 5083 Aluminum sheet
1) The Chemical composition of 5083 Aluminum sheet
| Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Mn+Cr |
Ti |
Zr |
Other |
AL |
| single |
total |
| 5083 |
0.40 |
0.40 |
0.10 |
0.40
-1.0 |
4.0
-4.9 |
0.05
-0.25 |
- |
0.25 |
- |
0.15 |
- |
0.05 |
0.15 |
Remainder |
| 5182 |
0.20 |
0.35 |
0.15 |
0.20
-0.50 |
4.0
-5.0 |
0.10 |
- |
0.25 |
- |
0.10 |
- |
0.05 |
0.15 |
Remainder |
| 5454 |
0.25 |
0.40 |
0.10 |
0.50
-1.0 |
2.4
-3.0 |
0.05
-0.20 |
- |
0.25 |
- |
0.20 |
- |
0.05 |
0.15 |
Remainder |
| 5754 |
0.40 |
0.40 |
0.10 |
0.50 |
2.6
-3.6 |
0.30 |
- |
0.20 |
0.10
-0.60 |
0.15 |
- |
0.05 |
0.15 |
Remainder |
| 5059 |
0.45 |
0.50 |
0.25 |
0.60
-1.2 |
5.0
-6.0 |
0.25 |
- |
0.40
-0.9 |
- |
0.20 |
0.05
-0.25 |
0.05 |
0.15 |
Remainder |
2)The Mechanical properties of 5083 Aluminum sheet
| Alloy |
Temper |
Thickness
(mm) |
Mechanical properties |
| Tensile Strength(Mpa) |
Yield strength
(Mpa) |
Elongation
(%) |
Minimum Bending Radius of 180 Degree |
| standard value |
standard value |
A50 |
|
| Not less than |
5083
|
O/H111 |
4-8mm |
290-370 |
≥145 |
≥17 |
1.5t |
5083
|
H32 |
4-8mm |
305-385 |
≥215 |
≥12 |
--- |
| 5182 |
O/H111 |
4-8mm |
280-350 |
≥125 |
≥26 |
1t |
5454
|
O/H111 |
4-8mm |
215-285 |
≥85 |
≥19 |
1t |
| 5454 |
H32 |
4-8mm |
250-305 |
≥180 |
≥12 |
--- |
| 5754 |
O/H111 |
4-8mm |
190-240 |
≥80 |
≥18 |
1t |
| 5754 |
H32 |
4-8mm |
220-270 |
≥130 |
≥11 |
--- |
| 5059 |
O/H111 |
4-8mm |
330-380 |
≥160 |
≥24 |
1.5t |
4 The Product features of 5083 Aluminum sheet
1) The low density and light material of the 5083 Aluminum sheet make the weight of the aluminum alloy tank truck lighter. By reducing the weight, the payload of the entire vehicle can be increased. The weight of the single transported cargo is 18%-35% more than that of the carbon steel tank truck.
2) The chemical properties of the 5083 Aluminum sheet are stable, and its corrosion resistance is more than 70% higher than that of ordinary carbon steel. The enhanced corrosion resistance greatly reduces the related maintenance cost of the tank.
3) The appearance of the 5083 Aluminum sheet is more beautiful, and it is easy to clean without painting.
4) Petroleum oil tanker made of 5083 Aluminum sheet is safer: the aluminum alloy Oil Tanker has a low center of gravity ,so it is easy to brake. In addition, it can absorb the energy generated by the collision through deformation and will not suddenly tear, making it safer
5) Petroleum oil tanker made of 5083 Aluminum sheet have better fuel efficiency, reduce carbon dioxide emissions, and are more environmentally friendly.
6) The excellent characteristics of the 5083 Aluminum sheet make the service life of aluminum alloy Oil Tanker trucks longer. The old aluminum alloy tanks with good maintenance can also be used on the new chassis, even if the tanks are scrapped, there is a higher recycling value.
5 The Application of 5083 Aluminum sheet
5083 Aluminum sheet is used to manufacture Petroleum oil tanker trucks, natural gas tank trucks, cement tank trucks, various liquid, liquefied gas and powder cargo transportation vehicles.
Audited Supplier 
){kind=link}
){kind=link}