8011 Aluminum Sheet for Cap

• Application: PP Cap/Ropp Cap
• Certification: ISO9001, ASTM
• Technique: Hot Rolled/Cast Rolled
• Grade: 8000 Series
• Temper: /H14/H16
• Surface Treatment: Mill Finish
• Model NO.: 8011
• Alloy: Alloy
• Thickness: 0.2--0.27mm
• Transport Package: Export Standard Wooden Pallet
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7606119000
• Production Capacity: 10000mt/Month

Product Description

8011 aluminium sheet for PP cap ROPP cap
8011  aluminium lacquered sheet for PP cap ROPP cap
Aludium's Closure Sheets have superb deep-drawing capabilities and lacquer adhesion capabilities. These properties guarantee high quality printing results, giving your closure an impressive finish.A shiny end, in many shapes and colors. Aluminium has exactly the properties that closures need.

Alloy: 8011 
Temper: H14 
Thickness: 0.17-0.23mm 
Width: 800-1000mm  
Length: 600mm--1000mm 

Surface type: 
a. Plain mill finish aluminum strip
b. DOS oil lubricated finish
c. Chromated finish
d. One side golden/white/red/blue/black,etc other colored, other side protective lacquered 
e. both sides clear/transparent lacquered 
 
Test item: autoclave test, Hgcl2 test;
Tensile strength: 130-155mpa;
Elongation: 2.5-3.5%;
Earring: 2% Max;
Packing: export standard wooden boxes;
 
Application :
    ROPP cap, PP cap, roll on pilfer proof cap, aluminum pilfer-proof cap, pilfer proof closure, aluminum bottle cap, aluminum screw cap, tear off caps, flip off  caps.

Chemical Composition
Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Other		Aluminum
										Each	Total
8011	0.4-0.8	0.5-1.0	0.1	0.1	0.1	0.1	-	0.1	0.05	0.05	0.15	Remainder

 

Temper	Thickness mm	Tensile Strength  Rm MPa		Yield Strength  Rp0.2 MPa		Elongation %  A50mm	Bend Radius		Hardness HBWa
H14	0.20-0.27	min.	max.	min.	max.		180°	90°
		120	170	110		1			41
H16	0.20-0.27	160		145		1			50

 
8011 aluminium plain strip, aluminium lacquered strip for Injection vial seals
 
Alloy: 8011 
Temper: H14 
Thickness: 0.17-0.23mm 
Width: 50-900mm 
Coil ID: 76mm 152mm 


 
Surface type: 
a. Plain mill finish aluminum strip;
b. DOS oil lubricated finish;
c. Chromated finish;
d. One side golden/white/red/blue/black,etc other colored, other side protective lacquered;
e. both sides clear/transparent lacquered;
 
Test item: autoclave test, Hgcl2 test 
Tensile strength: 130-155mpa
Elongation: 2.5-3.5%
Earring: 2% Max
Packing: export standard wooden boxes 
 
Application : vial aluminium seals, aluminium tear off seal, aluminium flip - off vial seals, aluminium closures, pharmaceutical caps, pull-off aluminum cap, aluminum seal cap for injection vial,aluminum cap for injection bottle.

Chemical Composition
Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Other		Aluminum
										Each	Total
8011	0.4-0.8	0.5-1.0	0.1	0.1	0.1	0.1	-	0.1	0.05	0.05	0.15	Remainder

 

Temper	Thickness mm	Tensile Strength  Rm MPa		Yield Strength  Rp0.2 MPa		Elongation %  A50mm	Bend Radius		Hardness HBWa
H14	0.20-0.27	min.	max.	min.	max.		180°	90°
		120	170	110		1			41
H16	0.20-0.27	160		145		1			50

 Alloy type 8011 H16 According to EN573-3

1.Chemical Composition : Alloy type 8011 H16 According to EN573-3
 
2.Size and deviations from the size:
 
-Thickness tolerance +/- 0.005mm
-Width tolerance -0+0.5mm
-Length tolerance -0+0.5mm

3.Deviations of the forms/shapes:
 
- Deviations of the straight for hardness of the longitudinal border max 1mm
- Deviation of flatness--max 4mm
- Rectangularity: max difference in the diagonals--3mm
- Dislocation between the sheets--max 2mm
 
4.Surface of the sheets
 
The surface of the sheets shall be oil-free, this is controlled by testing with clean natural cotton pads, dipped in 100% distilled water. Laying is steady, without stopping from end to end. Level of oil free, B,C, or D.
Droplets, spots caused by corrosion and burnt lubricant on the surface of the sheets not acceptable.
Minor scratches and staining not acceptable as well.
 
Surface type: 
a.Plain mill finish aluminum strip
b.DOS oil lubricated finish
c.Chromated finish
d.One side golden/white/red/blue/black,etc other colored, other side protective lacquered 
e.both sides clear/transparent lacquered 
 
5.Mechnical data:
 
Resistance to stretching Rm--Min 180 Mpa  Max 220 Mpa
Yield strength Rpop Min 145Mpa
Elongation Min 2%
 
6.Packaging:
 
Wooden case packing could guarantee the quality of the materials during transportation and storage.
All stacks of the aluminum sheets are bound firmly in nylon, and respectively fixed in wooden cases.

Chemical Composition
Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Other		Aluminum
										Each	Total
8011	0.4-0.8	0.5-1.0	0.1	0.1	0.1	0.1	-	0.1	0.05	0.05	0.15	Remainder

 

Temper	Thickness mm	Tensile Strength  Rm MPa		Yield Strength  Rp0.2 MPa		Elongation %  A50mm	Bend Radius		Hardness HBWa
H14	0.20-0.27	min.	max.	min.	max.		180°	90°
		120	170	110		1			41
H16	0.20-0.27	160		145		1			50