Application: | Injection Vial Seals |
---|---|
Certification: | ISO9001, ASTM, Lloyds/BV/ABS/Dnv |
Technique: | Hot Rolled/Cast Rolled |
Grade: | 1000 Series |
Temper: | O,H12,H14,H16,H18,H22,H24,H26 |
Surface Treatment: | Mill Finish |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Alloy Designation | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V | Remarks | Others | Aluminium min |
||
Numerical | Chemical Sympols | Each | Total | |||||||||||||
EN AW -1350 |
EN AW- AI 99.5 |
0.10 | 0.40 | 0.05 | 0.01 | - | 0.01 | - | 0.05 | - | 0.03 | - | 0.05B; 0.02V+Ti |
0.03 | 0.10 | 99.50 |
Internal Alloy Design | Former B.S. Specs |
0.2% Proof Stress MPa |
Tensile Strength MPa |
% Elongation | Shear Strength MPa |
Fatigue Strength 50 mil. cycles MPa |
Hardness | ||||
On √5.65 SO |
On 50 mm |
Brinell | Vickers | Rockwell B | |||||||
1350 | 0 H12 H14 H16 |
P1E | 95 110 125 |
85 - - - |
- - - - |
- 60 70 75 |
55 - - - |
- - - - |
- - - - |
- - - - |
- - - - |
Alloy-Temper | Tensile Strength (ksi) |
Yield Strength (ksi) |
Elongation (%) |
1350-O | 12 | 4 | 34 |
1350-H14 | 16 | 14 | 3 |
1350-H19 | 27 | 24 | 2 |
Suppliers with verified business licenses