Corrosion-Resistant 5454 Aluminium Coil Strip

• Customization: Available
• Application: Transportation Tools, Decorations, Lighting,Printing
• Certification: ISO9001, ASTM, GB, EN
• Model NO.: 5454
• Technique: Hot Rolled/Cast Rolled
• Grade: 5000 Series
• Temper: H34,H32,H111,H112,H114
• Surface Treatment: Mill Finish
• Alloy: Alloy
• Thickness: 0.5-150mm
• Width: 25-2200mm
• Transport Package: Export Standard Wooden Pallet
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7606119000
• Production Capacity: 10000mt/Month

Product Description

5454 Aluminium Coil Strip Introduction
5454 Flat Aluminium Strip / Flat Aluminum Strips in China

The aluminum coil is a metal product that is cut after pressed by casting mill and pulled at corners. Aluminum coil is widely used in electronics, packaging, construction, and machinery. According to the different metal elements contained in aluminum coil, it can be divided into 9 categories.

Aluminum alloys contain strong corrosion resistance. These alloys are good low-temperature alloys. Aluminium / Aluminum alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). The strength of these alloys increases when exposed to subzero temperatures and the strength decreases when exposed to high temperatures.

Chemical Properties - 5454 Aluminium Coil Strip

Alloy Designation

Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

Ti

Ga

V

Remarks

Others

Aluminium min

Numerical

Chemical Sympols

Each

Total

EN AW -5454

EN AW- AI Mg3Mn

0.25

0.4

0.1

0.5-1.0

2.4-3.0

0.05-0.2

-

0.25

0.2

-

-

-

0.05

0.15

Remainder

Mechanical Properties - 5454 Aluminium Coil Strip

The following datasheet provides an overview of Aluminium / Aluminum 5454 alloy.
 
Physical Properties - 5454 Aluminium Coil Strip
The following table shows the physical properties of Aluminium / Aluminum 5454 alloy.

Properties	Metric	Imperial
Density	2.6-2.8 g/cm3	0.0939-0.1011 lb/in3
Melting point	607°C	1125°F

Thermal Properties - 5454 Aluminium Coil Strip
The thermal properties of Aluminium / Aluminum 5454 alloy are given in the following table.

Properties		Conditions
		T (ºC)	Treatment
Thermal conductivity	134 (W/mK)	25	All

Fabrication and Heat Treatment
 
Annealing
Aluminium / Aluminum 5454 alloy is annealed at 343°C (650°F) only when the need to relieve the cold working stress arises. After being sufficiently heated the alloy is finally cooled in air.
 
Cold Working
Aluminium / Aluminum 5454 alloy is capable of being cold worked by using conventional methods. This alloy can be cold worked in any of the H-32, H-34, H-111 tempers or in the annealed condition.
 
Welding
Aluminium / Aluminum 5454 alloy is capable of being welded by all the commercial welding methods.
 
Forging
Aluminium / Aluminum 5454 alloy can be hot forged.
 
Forming
Aluminium / Aluminum 5454 alloy can be readily cold worked in the annealed or tempered conditions. This alloy contains good cold working and hot working characteristics.
 
Machinability
The machinability of Aluminium / Aluminum 5454 alloy is rated from fair to poor. Machining operations for this alloy is recommended when the alloy is in the H-34 temper condition. Oil lubricants can be used in the machining process.
 
Heat Treatment
Aluminium / Aluminum 5454 alloy cannot be heat treated.
 
Hot Working
Aluminium / Aluminum 5454 alloy can be hot worked in the temperature range of 371 to 204°C (700 to 400°F).
 
Hardening
Aluminium / Aluminum 5454 alloy can be hardened only by being cold worked.
 
Applications
Aluminium / Aluminum 5454 alloy is used in pressure vessels, marine service and welded structures.