Corrosion-Resistant 5754 Aluminium Circle Disc

Product Description

5754 Aluminium disc 

Chalco aluminium is professional aluminium disc manufacturer in China, the aluminium disc because of its DDQ--deep drawing quality and spinning quality, hard anodizing quality, they are widely used for making cookware, cooking utensils, non-stick cookware etc. The spinning quality deep drawing quality aluminim disc norally include alloy A3003, ally A3004, alloy A1200, alloy A1100, alloy A1070, alloy A1060, alloy A1050, and normally in temper O, H12 and H14,O temper aluminium disc normally is used for making cookware body, H12 and H14 temper aluminium disc normally used for making cookware cover, H14 temper disc sometimes used to make cookware bottom. Our A1050 A1060 A1070 A1200 A1100 A3003 A3004 aluminum disc are hot rolled quality, fine grain, after anodizing the surface no looper line, very bright and  excellent pearl color surface.

Chalcoaluminium manufactures alloy 5754 aluminium disc with with higher strength and excellent in forming and corrosion resistance that can be subject to further treatment by the following methods: deep drawing, spinning,etc.

Aluminum circle is widely used in electronics, daily chemicals, medicine, automobile accessories,aerospace, military, mold, construction, printing ,non stick pan, pressure cooker,lampshade, water heater shell and stretching tank etc.It is one of the most used deep processing products of aluminum alloy plate and strip.

Alloy: 5754
Temper: O, H12, H14,H16,H18,H22,H24,H26,H32,H34
Thickness: 0.4~150mm
Diameter: 80~1200mm
Surface:Mill finish
 
Chemical Properties

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ga	V	Ti	Other	Min.A1
5754	0.4	0.4	0.10	0.5	2.6-3.6	0.3	-	0.2	0.15	-	-	0.15	Remainder

 

Section	Alloy	Characteristics	Application
5000 series	AA5A02 AA5A05 AA5005 AA5052 AA5754 AA5454 AA5083	Have higher strength than 3000series and excellent in forming and  corrosion resistance		Spare parts, Rocket bottom,Pressure Vessel,Oil tanker cover,Cover in outdoor,etc.

Diameter List

>=20	>=140	>=170	>=200	>=250	>=300	>=400	>=500	>=600	>=700	>=800
20	140	170	200	250	300	400	500	600	700	800
25	141	172	203	252	305	405	505	610	705	810
93	142	173	205	254	310	410	510	615	710	838
100	143	175	210	255	312	420	515	619	720	890
105	144	176	211	258	315	425	520	630	730	902
109	145	177	212	260	320	430	525	635	740	945
110	147	178	215	267	325	435	530	645	760	960
112	149	180	216	268	330	440	540	650	770	1000
115	150	181	217	270	335	445	545	655	780	1150
118	153	182	218	272	340	450	550	665		1200
120	154	183	220	274	345	455	560	670
121	155	184	221	275	350	460	565	680
122	157	185	222	277	355	465	570	690
123	158	188	225	278	360	470	575
124	160	190	226	280	364	475	580
127	161	192	230	282	368	480	585
128	162	193	233	285	370	485
129	163	195	235	290	375	490
130	164	198	237	292	380	495
132	165		238	293	385
133	166		240	295	390
134	167		242		395
135	168		245
136	169		249
137
138
139

Properties

Physical Property	Value
Density	2.66 g/cm3
Melting Point	600 degree
Thermal Expansion	24 x10^-6 /K
Modulus of Elasticity	68 GPa
Thermal Conductivity	147 W/m.K
Electrical Resistivity	0.049 x10^-6  .m

Spec: BS EN 485-2:2008
Sheet & Plate - 0.2mm to 40mm

Mechanical Property	Value
Proof Stress	130 Min MPa
Tensile Strength	220 - 270 MPa
Hardness Brinell	63 HB
Elongation A50 mm	7 Min %

5754 Aluminium Alloy disc Features:
1.Alloy 5754 aluminium disc with higher strength and excellent in forming and 
corrosion resistance
2.Wide range of selection on discs' size including customized shape and size.
3. Excellent reflectivity, good for Polishing;
4.Excellent deep drawing and spinning quality.
5.Good anodized quality, suitable for hard anodizing and enameling;
6.Clean surface and smooth edge, hot rolled quality, fine grains and after deep drawing no looper lines;
7.Excellent pearl color anodizing.
8.RoHS and REACH compliance
9.Well-Protected Packing

5052 Aluminium Alloy disc Intended uses:
making Spare parts, Rocket bottom,Pressure Vessel,Oil tanker cover,Cover in outdoor,etc.
 
Applications
5754 is typically used in:
~ Treadplate
~ Shipbuilding
~ Vehicle bodies
~ Rivets
~ Fishing industry equipment
~ Food processing
~ Welded chemical and nuclear structures