Long Radius Aluminum 180 Degree Elbow

• Type: Transport Aluminium Profile, Industrial Aluminium Profile, Marine/Shipping
• Shape: Elbows
• Grade: 5000 Series 6000 Series
• Temper: O-H112
• Alloy: Alloy
• Surface Finishing: PVDF/PE Coating,Anodized.
• Model NO.: 5086/6061
• Alloying Ingredient: 5059/5083/5086/5383
• Certification: SONCAP, ISO, BV/SGS/CNAS/Ma
• Polished Aluminum Profile: Mechanical Polishing
• Color: to Customized
• Transport Package: Export Standard Wooden Pallet or as Your Requsts
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7604210000
• Production Capacity: 5000mt/Month

Product Description

Long radius aluminum 180 degree elbow
We offer stock for different aluminum fittings, 5086H32 & 6061T6 Aluminum Pipe Fittings,aluminum elbow (Radius 90's, Long Radius 45's, Long Radius 180's, Short Radius 90's, Short Radius 180's), Tees (Straight and Reducing) Tees and Crosses (Straight and Reducing), Aluminum Caps,Aluminum couplings(straight and reducing), aluminum flanges. We also offer custom manufactured fittings, flanges and pipes.
 
5086 H32
5086 is the preferred hull material for small aluminium boats or larger yachts. Its high strength and good corrosion resistance make it an excellent match for yachting.
5086 has a tendency to undergo stress corrosion cracking and is not used much in aircraft construction as a result.
5086 has been used in vehicle armor, notably in the M113 Armored Personnel Carrier and M2 Bradley Infantry fighting vehicle.

6061-T6
T6 temper 6061 has an ultimate tensile strength of at least 42,000 psi (300 MPa) and yield strength of at least 35,000 psi (241 MPa).  More typical values are 45,000 psi (310 MPa) and 40,000 psi (275 MPa), respectively. In thicknesses of 0.250 inch (6.35 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties. The typical value for thermal conductivity for 6061-T6 at 80°C is around 152 W/m K. A material data sheet defines the fatigue limit under cyclic load as 14,000 psi (100 MPa) for 500,000,000 completely reversed cycles using a standard RR Moore test machine and specimen. Note that aluminum does not exhibit a well defined "knee" on its S-n graph, so there is some debate as to how many cycles equates to "infinite life". Also note the actual value of fatigue limit for an application can be dramatically affected by the conventional de-rating factors of loading, gradient, and surface finish.
 

Nominal Dimension DN	Bevel    D		Center to Center       O I Series	Bottom to Top  K
	I Series	2 Series		I Series	2 Series
15	21.3	18	76	48	47
20	26.9	25	76	51	51
25	33.7	32	76	56	54
32	42.4	38	95	70	67
40	48.3	45	114	83	80
50	60.3	57	152	106	105
65	73.0	76	190	132	133
80	88.9	89	229	159	159
90	101.6		267	184
100	114.3	108	305	210	206
125	141.3	133	381	262	257
150	168.3	159	457	313	308
200	219.1	219	610	414	414
250	273.0	273	762	518	518
300	323.9	325	914	619	620
350	355.6	377	1067	711	722
400	406.4	426	1219	813	823
450	457	480	1372	914	925
500	508	530	1524	1016	1026
550	559		1676	1118
600	610	630	1829	1219	1229