Durable 5A02 Aluminium Circle Disc

• Customization: Available
• Application: Kitchen Appliances,Reflector Panel, Traffic Sing
• Certification: ISO9001, ASTM, GB, EN
• Model NO.: 5A02
• Technique: Hot Rolled/Cast Rolled
• Grade: 5000 Series
• Temper: O,H12,H14,H16,H18,H22,H24,H26,H32,H34
• Surface Treatment: Mill Finish
• Alloy: Alloy
• Thickness: 0.4--150mm
• Diameter: 80-1200mm
• Transport Package: Export Standard Wooden Case
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7606121000
• Production Capacity: 10000mt/Month

Product Description

5A02 aluminium disc
 
Chalco aluminium manufactures alloy 5A02 aluminium disc with with higher strength and excellent in forming and corrosion resistance that can be subject to further treatment by the following methods: deep drawing, spinning,etc.
 
5A02 alloy is suitable for a high degree of plasticity process requirements and good corrosion resistance of welded structures and containers, if wanted, gasoline and lubricants catheters, nails, flanges, and parts, ships, interior trim light duty vehicles, etc. pickles or rod used as a counsel.
Aluminum circle is widely used in electronics, daily chemicals, medicine, automobile accessories,aerospace, military, mold, construction, printing ,non stick pan, pressure cooker,lampshade, water heater shell and stretching tank etc.It is one of the most used deep processing products of aluminum alloy plate and strip.

Alloy: 5A02
Temper:O,H12,H14,H16,H18,H22,H24,H26,H32,H34
Thickness:0.4~150mm
Diameter:80~1200mm
Surface:Mill finish
Tensile strength σb (MPa): ≤147
Elongation δ10 (%): ≥14

Chemical Properties
 

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ga	V	Ti	Other	Min.A1
5A02	0.40	0.40	1.10	0.15-0. 40	2.0-2.8	-	-	-	-	-	0.15	0.20	Remainder

 

Section	Alloy	Characteristics	Application
5000series	AA5A02 AA5A05 AA5005 AA5052 AA5754 AA5454 AA5083	Have higher strength than 3000series and excellent in forming and  corrosion resistance		Spare parts, Rocket bottom,Pressure Vessel,Oil tanker cover,Cover in outdoor,etc.

Diameter List
 

>=20	>=140	>=170	>=200	>=250	>=300	>=400	>=500	>=600	>=700	>=800
20	140	170	200	250	300	400	500	600	700	800
25	141	172	203	252	305	405	505	610	705	810
93	142	173	205	254	310	410	510	615	710	838
100	143	175	210	255	312	420	515	619	720	890
105	144	176	211	258	315	425	520	630	730	902
109	145	177	212	260	320	430	525	635	740	945
110	147	178	215	267	325	435	530	645	760	960
112	149	180	216	268	330	440	540	650	770	1000
115	150	181	217	270	335	445	545	655	780	1150
118	153	182	218	272	340	450	550	665		1200
120	154	183	220	274	345	455	560	670
121	155	184	221	275	350	460	565	680
122	157	185	222	277	355	465	570	690
123	158	188	225	278	360	470	575
124	160	190	226	280	364	475	580
127	161	192	230	282	368	480	585
128	162	193	233	285	370	485
129	163	195	235	290	375	490
130	164	198	237	292	380	495
132	165		238	293	385
133	166		240	295	390
134	167		242		395
135	168		245
136	169		249
137
138
139

Mechanical properties
Low mechanical properties:
Tensile strength σ(MPa) : ≤225
Elongation delta δ(%) : ≥10
Note: rod longitudinal mechanical properties at room temperature
Sample size: bar diameter (square bar, hexagonal bar inscribed disc diameter) of 150 or less
 
Heat treatment specification:
1) homogenizing annealing: heating to 440 ºC. Holding time 12 ~ 14 h;Air cooling.
2) rapid annealing: heating to 350 ~ 350 ºC.The heat preservation time of 30 ~ 120 min;Air or water.
3) high temperature annealing: heating to 350 ~ 350 ºC.Thickness or < 6 mm or 6 mm, heat preservation time is 2 ~ 10 min or 10 ~ 30 min;Air cooling.
4) low temperature annealing: heating to 250 ~ 300 ºCand 150 ~ 180 ºC;Holding time is 1 ~ 2 h, air cooling.
 
5A02 Aluminium Alloy disc Features:
Alloy 5A02 aluminium disc with higher strength and excellent in forming and 
corrosion resistance
2.Wide range of selection on discs' size including customized shape and size.
3. Excellent reflectivity, good for Polishing;
4.Excellent deep drawing and spinning quality.
5.Good anodized quality, suitable for hard anodizing and enameling;
6.Clean surface and smooth edge, hot rolled quality, fine grains and after deep drawing no looper lines;
7.Excellent pearl color anodizing.
8.RoHS and REACH compliance
9.Well-Prote