Aluminium Aluminum D-Type Header Pipe Tube China Manufacturer

• Customization: Available
• Type: Decoration Aluminium Profile, Heat Sink Aluminium Profile, Transport Aluminium Profile, Industrial Aluminium Profile, Condensers
• Shape: Square/Round/Flat/or as Customers′ Drawing
• Model NO.: 4045/4343/4043/7072 /3003/3305/6063
• Grade: 3000/4000 Series
• Temper: H14,H16,H18
• Alloy: Non-alloy
• Surface Finishing: Mill Finish/Polished/Anodizing/Brushing
• Alloying Ingredient: 3000/4000 Series
• Certification: CE, ISO, ISO9001:2008/SGS
• Polished Aluminum Profile: Mechanical Polishing
• Weld Width: Less Than or Equal To2mm
• Weld Line Height: Less Than or Equal To0.08mm
• Outer Diameter: 9-61mm
• Wall Thickness: 1-3.0mm
• Transport Package: Ep Paper Inside, Craft Paper/Pallet Outside.
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7604210000
• Production Capacity: 10000mt/Month

Product Description

The Evaporator Material (D-Type Condenser header aluminium pipe ) is also one of the important components in the air conditioning system, and the D-Type Condenser header pipe evaporator can reduce energy consumption.
Because of the evaporator D-Type pipe structure increases the heat exchange area, the heat exchange area increases, the evaporation temperature is increased, the cooling capacity is increased, the cooling capacity coefficient is increased, and the energy consumption is reduced.

1, The Type of Evaporator Material (D-Type Condenser header aluminium pipe ) :
1) Punched Condenser Header Pipe
Cladding type: single Cladding material, double Cladding material
Material Temper: H14;
Cladding rate: 10±2
Wall thickness: 1-2.5mm

2) Condenser header pipe D-type
Cladding type: single Cladding material, double Cladding material
Core layer: 3003, 3305
Wall thickness: 1-2.5mm

2, The Introduction of Evaporator Material (D-Type Condenser header aluminium pipe ) 
Cladding type: single Cladding material, double Cladding material
Cladding layer: 4045, 4343, 7072 anti-corrosion layers
Material Temper: H14,H18,or according to customer requirements;
Cladding rate: 10±2 or according to customer requirements
Core layer: 3003, 3305
Production Process: high frequency welding, cold drawing
Wall thickness: 1-2.5mm
Appearance: can be customized according to customer requirements.

3,The Characteristics of Evaporator Material (D-Type Condenser header aluminium pipe ) 
1). light weight
2). easy welding
3). Good corrosion resistance
4). Good Voltage Resistance
5). Compliance with standard ROHS
6). High recycling value
7). Small deviation range
8). High surface quality

4, The Usage of Evaporator Material (D-Type Condenser header aluminium pipe ) :
Evaporator Material (D-Type Condenser header pipe) are mainly used in automotive evaporators, heaters, condensers, parallel flow condensers, new energy vehicles, etc.

5, The tech requirements and common dimensions of the Evaporator Material (D-Type Condenser header aluminium pipe ) are shown below:
1).The cutting section burr does not exceed 0.1mm,and the inner wall weld line height does not exceed 0.2mm
2).Cutting section 90°+/-2
3).The inner and outer surface of the pipe should be clean and free of foreign matter such as oil,dust and aluminum chips;no defects such as pressure pits,bumps,and scratches are allowed.
4).The length and material of the pipe are customized according to customer's requirements
5).The existing specifications of our company are shown as below table (the burst pressure in the table is defined by the bursting pressure of the high-frequency welded pipe before drawing)



1, The type of Condenser Header Pipe (Cladding Aluminium Round Tube)
1),Cladding Round Condenser Header Pipe    2),Punched Condenser Header Pipe

Cladding type: Single Side Cladding material, Double Sides Cladding material
Outer diameter: 9-61mm
Wall thickness: 1-3.0mm

2, Introduction of Condenser material (Condenser Header Pipe)
Cladding type: Single Side Cladding material, Double Sides Cladding material
Cladding layer: 4045, 4343, 4043,7072 and other anti-corrosion layers, can be added with zinc as needed,
Material Temper:M,H14,H16,H18,or according to customer requirements;
Cladding rate: 10±2 or according to customer requirements
Core layer: 3003, 3305,6063,etc
Outer diameter: 9-61mm
Process: High frequency welding
Wall thickness: 1-3.0mm

3.The Characteristics of Condenser Header Pipe (Cladding Aluminium Round Tube)
1). light weight
2). easy welding
3). Good corrosion resistance
4). Good Voltage Resistance
5). Compliance with standard ROHS
6). High recycling value
7). Small deviation range
8). High surface quality

4. The Usage of the Condenser Header Pipe (Cladding Aluminium Round Tube):
The Condenser Header Pipe (Cladding Aluminium Round Tube) is mainly used in condensers, oil coolers, including automotive refrigerators, new energy vehicles, home appliance air conditioners, construction machinery, spacecraft mooring and other heat exchanger cores.

5, The tech requirements and common dimensions of the Condenser Header Pipe (Cladding Aluminium Round Tube) are shown below:
1),Weld width:≤2mm;Weld line height≤0.08mm
2),Cutting end face angle 90°+/-2,no burrs.
3),The inner and outer surface of the pipe should be clean and free of foreign matter such as oil,dust and aluminum chips;no defects such as crushing or scratching are allowed;
4),Straightness is ≤0.5mm/500mm
5),The length of the pipe,whether the end face is chamfered and the material are in accordance with customer requirements
6)The specific specifications of our company are shown as below: