Customization: | Available |
---|---|
Application: | Transportation Tools, Decorations, Lighting,Printing |
Certification: | ISO9001, ASTM, GB, EN |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Alloy Designation | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V | Remarks | Others | Aluminium min |
||
Numerical | Chemical Sympols | Each | Total | |||||||||||||
EN AW -1060 |
EN AW- AI 99.6 |
0.24 | 0.35 | 0.05 | 0.03 | 0.03 | - | - | 0.05 | 0.03 | - | 0.05 | - | 0.03 | - | 99.60 |
Alloy Designation | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Ga | V | Remarks | Others | Aluminium min |
||
Numerical | Chemical Sympols | Each | Total | |||||||||||||
EN AW -1100 |
EN AW- AI 99.0Cu |
0.95 Si+Fe | 0.05-0.20 | 0.05 | - | - | - | 0.10 | - | - | - | e | 0.05 | 0.15 | 99.00 |
Thickness(mm) | Tensile strength(Mpa) | Yield strength(Mpa) | Elongtion(%) |
0.2-0.3 | 110-145 | 95 | 1 |
0.301-0.5 | 110-145 | 95 | 2 |
0.51-1.5 | 110-145 | 95 | 3 |
1.51-4.0 | 110-145 | 95 | 5 |
Alloy | Supplier Temper |
Testing Temper |
Thickness (mm) |
Tensile Strength Rm/Mpa |
Extension Strength Rp0.2/MPa |
Elongation after Break | Bending Radius | ||
A50mm | A5.55e | ||||||||
Not less than | |||||||||
O | O | > 0.2 - 0.30 | 60 - 100 | 15 | 15 | - | - | ||
> 0.3 - 0.50 | 18 | - | - | ||||||
> 0.5 - 1.50 | 23 | - | - | ||||||
> 1.5 - 6.0 | 25 | - | - | ||||||
> 6.0 - 80.0 | 25 | 22 | - | ||||||
H12 | H12 | > 0.5 - 1.50 | 80 - 120 | 60 | 6 | - | - | ||
H22 | H22 | > 1.5 - 6.0 | 12 | - | - | ||||
H14 H24 |
H14 H24 |
> 0.2 - 0.3 | 95 - 135 | 70 | 1 | - | - | ||
> 0.3 - 0.5 | 2 | - | - | ||||||
> 0.5 - 0.8 | 2 | - | - | ||||||
> 0.8 - 1.5 | 4 | - | - | ||||||
> 1.5 - 3.0 | 6 | - | - | ||||||
> 3.0 - 6.0 | 10 | - | - | ||||||
H16 H26 |
H16 H26 |
> 0.2 - 0.3 | 110 - 155 | 75 | 1 | - | - | ||
> 0.3 - 0.5 | 2 | - | - | ||||||
> 0.5 - 0.8 | 2 | - | - | ||||||
> 0.8 - 1.5 | 3 | - | - | ||||||
> 1.5 - 4.0 | 5 | - | - | ||||||
H18 | H18 | > 0.2 - 0.3 | 125 | 85 | 1 | - | - | ||
> 0.3 - 0.5 | 2 | - | - | ||||||
> 0.5 - 1.5 | 3 | - | - | ||||||
> 1.5 - 3.0 | 4 | - | - | ||||||
H112 | H112 | > 4.5 - 6.0 | 75 | - | 10 | - | - | ||
> 6.0 - 12.5 | 75 | 10 | - | - | |||||
> 12.5 - 40.0 | 70 | - | 18 | - | |||||
> 40.0 - 80.0 | 60 | - | 22 | - | |||||
F | - | > 2.5 - 150 | - | - |
TOLERANCE | |||||
Major Brand | A1060(O) | ||||
Thickness | 0.2-0.4 | 0.4-0.8 | 0.9-1.1 | 1.2-1.6 | 1.8-2.0 |
tolerance | ±0.01 | ±0.015 | ±0.02 | ±0.025 | ±0.03 |
Width | <100 | 100-200 | 201-500 | 501-1250 | >1250 |
tolerance | ±0.1 | ±0.2 | ±0.2 | ±1 | ±2 |
BURR AND COLLAPSE | |||||
The width of aluminum belt | burr's height | collapsed side's height | |||
<0.2 | 0.01 | ≥0.05-0.1 | |||
0.2-1.0 | 0.015 | ||||
1.1-1.5 | 0.02 | ||||
>1.6 | 0.03 | ||||
MECHANICAL PROPERTY | |||||
U.T.S: 60-95N/mm2 | Elongation: >25% | ||||
Density in 20°C :2.703kg/dm3 | Max.resistance in 20°C:≤0.02825Ωmm2/m |