1100 Parallel Flow Aluminum Tube

• Customization: Available
• Color: Silver
• Application: Transportation Tools, Door & Window, Decorations
• Model NO.: 1100
• Technique: Cold Excruding
• Grade: 1000 Series
• Temper: O/F
• Surface Treatment: Polished
• Alloy: Alloy
• Elongation: More Than 10%
• Transport Package: Export Standard Wooden Pallet
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7606125900
• Production Capacity: 20000mt/Month

Product Description

1100 Parallel Flow Aluminum Tube

1,The Introduction of 1100 Parallel Flow Aluminum Tube
1100 aluminum is used to produce porous micro-channel aluminum flat tubes because of its good ductility, formability, weldability and corrosion resistance; Using of the refined 1100 aluminum rods, going through of Hot extrusion, and zinc sprayed on the surface,so as to produce out of 1100 Parallel Flow Aluminum Tube, which are mainly used in various refrigerant air-conditioning systems as pipe parts carrying new environmentally friendly refrigerants, are the key materials for the new generation of parallel-flow micro-channel air-conditioning heat exchangers.

2.The Specifications of 1100 Parallel Flow Aluminum Tube
The specific specifications are as follows:
1) Alloy: 1100
2) Temper: O / F / H111 / H112
3) Width: 6mm-240mm
4) Height: Above 0.8mm
5) Wall thickness:Above 0.12mm
6) Number of Ports: 2-75 Ports or according to customer drawing requirements
7) Delivery status: Coiled Flat Tubes or cut into different lengths according to customer requirements.
Length: 50-6000mm
8) The Specifications of Coiled aluminum flat tube:
Reel inner diameter: 400-550mm, etc.
Reel outer diameter: 700-1500mm, etc.
Reel height / width: 300-1000mm, etc.
Zinc layer weight: 6-8g / m² or according to customer requirements
9) The product specification deviations see as below (The cross-sectional views see as below):

The deviation of Product specification
Specification W(Width) x H(Height)x L(Length)	Allowable deviation (mm)
W(Width) :6mm-240mm	± 0.2mm max
H(Height):Above 0.8mm	± 0.1mm max
Plane wall thickness t1:Above 0.12mm	± 0.1mm max
Support thickness: t2	± 0.1mm max
Side end wall thickness:t3	± 0.1mm max
L(Length)≤1000mm	± 0.5mm
L(Length) >1000-2000mm	± 1.5mm
L(Length) >2000- 6000mm	± 2.0mm
Flatness	≤0.2mm
Curvature(Every 300mm length)	≤0.3mm
Curvature(Full length on L meter)	≤1.0 x L(mm)
Twisting degree (Full length on L meter) L ≤ 1	≤1.0 x L(mm)
Twisting degree(Full length on L meter) L > 1	≤1.0 (mm)
Note: The deviation range of product specifications can also be controlled according to customer requirements

10)The chemical composition of 1100 Parallel Flow Aluminum Tube is as follows:

Alloy

Chemical component(%)

Si

Fe

Cu

Mn

Mg

Cr

Zn

Ti

Ni

Other

Al

Each

Total

1100

Si+Fe≤0.95

0.05-0.20

≤0.05

-

-

≤0.10

-

-

≤0.05

≤0.15

99.00

11)The mechanical properties of 1100 Parallel Flow Aluminum Tube in room temperature are as follows

Alloy	Temper	Tensile Strength Rm MPa	Yield Strength Rp0.2 MPa	Elongation  A50mm %
		not less than
1100	H112	75	20	20

12)The Pressure resistance of 1100 Parallel Flow Aluminum Tube
For flat tubes of water (oil) medium heat exchangers for automobile air conditioners, household or commercial air conditioners, and other purposes, the burst pressure should meet the requirements of the table below. When the purchaser has special requirements or the product is used for other purposes, the supplier and buyer can negotiate to determine the burst pressure.
 

Bursting pressure                               Unit:MPa
Automotive air conditioner heat exchanger			Household or commercial air-conditioning heat exchangers	Water (oil) medium heat exchangers for other purposes
Non-electric vehicle		Electric car
Condenser	Evaporator
≥11.5	≥5.5	≥11.5	≥16.5	≥14.5

3,The Product features of 1100 Parallel Flow Aluminum Tube
1) The 1100 Parallel Flow Aluminum Tube is light in weight and has good thermal conductivity and electrical conductivity
2) 1100 Parallel Flow Aluminum Tube has good corrosion resistance
3) 1100 Parallel Flow Aluminum Tube has good ductility, formability and weldability
4) 1100 Parallel Flow Aluminum Tube has high recycling value
5) The 1100 Parallel Flow Aluminum Tube produced by our company has a small deviation range and high surface quality.

4,The Product application of 1100 Parallel Flow Aluminum Tube
The 1100 Parallel Flow Aluminum Tube is widely used in the home appliance refrigeration, refrigerator freezer, vehicle refrigeration, base station cooling, industrial refrigeration, etc fields, and is specifically used in condensers and evaporators with high requirements for automotive air conditioners and civil air conditioners

5. The current product drawings of 1100 Parallel Flow Aluminum Tube are as follows: