5052/5083/5086 Aluminum Alloy Moulding Plate

Product Description

5052/5083/5086 Aluminium Moulding Plate
 
Specifically designed for precision mould applications, the Chalco range has been developed to combine high strength and mechanical stability with outstanding machinability. Over the three decades since the brand's introduction, new Chalco alloys have been developed to satisfy the enhanced performance requirements of specific moulding technologies, such as improved weldability and resistance to stress corrosion or sustained high temperatures
 
For the specifier, this gives the reassurance of knowing that the performance characteristics of an Chalco mould will exactly match process requirements every time, with all that implies in terms of reliable long-term operation. Chalco alloys are supplied fully heat treated, with no further treatment required.
5052 Aluminum plate is mainly used for high demanding plasticity and good weldability. It is also often used in traffic vehicles and ships. It can also be used to make aircraft fuel tank, tubing, aerospace It belongs to aluminum alloy materials, and is a typical anti-rust alloy materials.

5083 Alloys is especially used in the construction industry and the most promising alloy. It has good corrosion resistance, excellent welding, good cold processing, and medium strength. The main alloy element of 5083 is magnesium, which has good forming and processing performance, corrosion resistance, welding, medium strength. It is used for making aircraft fuel tank, oil pipe, sheet metal parts of traffic vehicles and ships, instrument, street lamp support and rivet, hardware products, electric shell, etc.
 5086 aluminum plate is made for applications requiring high corrosion resistance, good weldability and medium strength, such as ship, car and aircraft plates weldable; It is also used in  pressure vessels, refrigeration units, television towers, equipment for installation, transportation equipment, missile parts, armor, etc.,

Wide plate tolerances Guaranteed
Changes in our production process allow Chalco to now guarantee flatness and thickness tolerances on all Chalco tooling and moulding plate. The improved guarantee sets a new industry standard for tooling plate tolerances.
 
Improved stability and consistency
As you kow, stability and consistency are integral to the quality of Chalco plate. Chalco's proprietary chemistry, casting, and production techniques provides excellent piece-to-piece stability and consistency. High stability and consistency reduce warping and movement during sawing and machining. Also, the plate's through-thickness consistency creates fewer metal inconsistencies for easier and faster machining, allowing less rework and fewer scrap pieces. And our superior lot-to-lot consistency means you get the same result time and time again, so youc an develop standard procedures for machining and finishing operations.
 
Expanded Satin Finish Range
Chalco's genuine satin finish is now available on all tooling plate, the satin finish is twice as smooth as plate with coarse, mechanical finishes. This superior smoothness lets you reduce or eliminate costly surface clean-up operations.
 
Better Identification System
Chalco has also recently updated its marking system. The new method paces product identification on the top of each plate. This new system lets you more easily and accurately identify the select the proper alloy, temper, size and specification. It also helps avoid errors by improving the traceability of sawed blanks.
 
A Quality Commitment
Chalco commit itself to quality processes, products, and performance. This commitment to quality-combined with a strong dedication to our customers-has made Chalco the leader in the aluminum industry. Chalco continuously strives to improve products and processes to meet customer needs and expectations.

General Specification
 

Alloy	Temper	Specification (mm)
		Thickness	Width	Length
5052,5083,5086	H111, H112, H116,T4, T6, T651	6~150mm	1000~2500	2000~6000
Remark: special specifications can be produced accordingly to your requirement.

Chemical Composition
 

Alloy	Si	Fe	Cu	Mn	Mg	Cr		Ni		Zn	Ti	Others		Alu min
												each	Total
5052	0.25	0.40	0.10	0.10	2.2~2.8	0.15~0.35		-		0.1	-	0.05	0.15
5083	0.40	0.40	0.10	0.4~1.0	4.0~4.9	0.05~0.25		-		0.25	0.15	0.05	0.15	remainder
5086	0.40	0.50	0.10	0.20~0.7	3.5~4.5	0.05~0.25	-		0.25		0.15	0.05	0.15	remainder

Physical Property
 

Alloy	Temper	Specified Thickness mm		Rm MPa		Rp 0.2 MPa		Elongation min.		Bend Radius		Hardness
		over	Up to	Min.	Max.	Min.	Max.	A50mm	A	180°	90°	HBW
5052	O/H111	6	12.5	165	215	65	-	19	-	-	2.0t	46
		12.5	80.0	165	215	65	-	-	18	-	-	46
	H112	6	12.5	190	-	80	-	7	-	-	-	55
		12.5	40.0	170	-	70	-	-	10	-	-	47
		40.0	80.0	170	-	70	-	-	14	-	-	47
5083	0/H111	6.3	12.5	270	345	115	-	16	-	-	-	75
		12.5	50.0	270	345	115	-	-	15	-	-	75
		50.0	80.0	270	345	115	-	-	14	-	-	73
		80.0	120.0	260	-	110	-	-	12	-	-	70
		120.0	200.0	255	-	105	-	-	12	-	-	69
	H112	6.0	12.5	275	-	125	-	12	-	-	-	75
		12.5	40.0	275	-	125	-	-	10	-	-	75
		40.0	80.0	270	-	115	-	-	10	-	-	73
		80.0	120.0	260	-	110	-	-	10	-	-	73
	H116	6.0	12.5	305	-	215	-	12	-	-	4.0t	89
		12.5	40.0	305	-	215	-	-	10	-	-	89
		40.0	80.0	285	-	200	-	-	10	-	-	83
5086	0/H111	6.3	12.5	240	310	100	-	17	-	-	2.5t	65
		12.5	150.0	240	310	100	-	-	16	-	-	65
	H112	6.0	12.5	250	-	105	-	8	-	-	-	69
		12.5	40.0	240	-	105	-	-	9	-	-	65
		40.0	80.0	240	-	100	-	-	12	-	-	65
	H116	6.0	12.5	275	-	195	-	10	-	-	3.5t	81
		12.5	50.0	275	-	195	-	-	9	-	-	81

Detailed Photos