Customization: | Available |
---|---|
Type: | Copper Wire |
Application: | Air Condition or Refrigerator, Water Tube, Oil Cooler Pipe, Electrical Equipment Manufacturing |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Diagonal dimension/mm | Permissible deviation | |
Advanced level | General level | |
0.5~1.0 | 0.01 | 0.02 |
>1.0~3.0 | 0.015 | 0.03 |
>3.0~6.0 | 0.02 | 0.03 |
>6.0~10.0 | 0.03 | 0.05 |
>10.0~15.0 | 0.07 | 0.1 |
Volume ratio of cladding layer/% | Subtense distance/mm | Temper | Density(g/cm3) | Tensile strength/MPa | Elongation/% | Maximum dc resistivity (Ω·mm2/m) |
Volume conductivity is not less than (%IACS) |
20 | 0.5~15 | Hard | 3.94 | ≥160 | ≥1.0 | 0.02596 | 66.4 |
0.5~15 | Soft | ≥110 | ≥12 | 0.0255 | 67.6 | ||
25 | 0.5~15 | Hard | 4.25 | ≥170 | ≥1.5 | 0.02548 | 67.7 |
0.5~15 | Soft | ≥115 | ≥13 | 0.02498 | 69 | ||
30 | 0.5~15 | Hard | 4.56 | ≥180 | ≥2 | 0.02477 | 69.6 |
0.5~15 | Soft | ≥120 | ≥14 | 0.02424 | 71.1 |
Width of flat wire/mm | Coil weight of flat wire /kg | |
Standard coil | Lighter coil | |
0.5~1.0 | 10±1 | 8±1 |
>1.0~3.0 | 22±2 | 20±2 |
>3.0~5.0 | 25±3,40±4 | 22±3,30±3 |
>5.0 | 70±5 | 50±5 |
Diameter/mm | Optimize diameter size /mm |
Acceptable tolerance |
>1.0~8.25 | 2,3,4,5,6,7,8 | ±1%d |
Standard diameter/mm | Tensile strength/MPa | Elongation/% | ||
Hard Y | Soft R | Hard Y | Soft R | |
min | max | min | max | |
1.00~2.05 | 207 | 138 | 1 | 15 |
2.06~2.30 | 200 | 138 | 1 | 15 |
2.31~2.59 | 193 | 138 | 1 | 15 |
2.60~2.91 | 186 | 138 | 1 | 15 |
2.92~3.26 | 179 | 138 | 1 | 15 |
3.27~3.67 | 172 | 138 | 1.5 | 15 |
3.68~4.12 | 166 | 138 | 1.5 | 15 |
4.13~4.62 | 159 | 138 | 1.5 | 15 |
4.63~5.19 | 152 | 138 | 1.5 | 15 |
5.20~5.83 | 138 | 138 | 1.5 | 15 |
5.84~6.54 | 124 | 138 | 1.5 | 15 |
6.55~8.25 | 110 | 138 | 1.5 | 15 |
Cladding volume ratio /% |
Temper | Density(g/cm3) | Maximum DC resistivity(Ω·mm2/m) | Volume conductivity is not less than(%IACS) |
20 | Hard | 3.94 | 0.02596 | 66.4 |
Soft | 0.0255 | 67.6 | ||
25 | Hard | 4.25 | 0.02548 | 67.7 |
Soft | 0.02498 | 69 | ||
30 | Hard | 4.56 | 0.02477 | 69.6 |
Soft | 0.02424 | 71.1 |