Fiberglass Insulated Aluminum Wire

• Customization: Available
• Certification: ISO9001, JIS, GB, EN
• Surface Treatment: Insulted
• Alloy: Alloy
• Thickness: 0.8--7mm
• Diameter: 0.2--8mm
• Width: 2--16mm
• Application: Mobile Transformer,Traction Transfomers
• Transport Package: Export Standard Steel and Pallet
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7605290000
• Production Capacity: 10000mt/Month

Product Description

Fiberglass Insulated Aluminum Wire

A layer of non-conductive material, such as resin, plastic, silicone rubber and PVC, is evenly and sealed around the wire, forming an insulating layer to prevent electrical leakage, short circuit and electric shock from contact with the outside world.

The glass in Glass Fibre Conductor may be applied in woven tape form or as a continuous fibre. It has proved to be an efficient insulation providing coil winders with thermal stability, adequate electrical properties and good resistance to abrasion after varnishing. The glass is bonded with a varnish to improve dielectric strength and mechanical properties.
 
Glass fibre-lapped conductors (bare or enameled) are very suitable for windings of electric motor stators, generators, special transfo rmers and high voltage motors. In general this insulation can be applied where high mechanical strength and high insulation properties are required. Most common application is in traction motors. It exhibits a very high degree of mechanical and thermal stability, either for class F and H insulation when impregnated with polyester, Polyesterimide or epoxy based impregnating varnishes. For higher thermal class, the Glass fibre-lapped conductors can be impregnated with silicone based resins of thermal class 200.
 
Characteristics : 
 
Conductor material : 
* Copper soft or with controlled proof stress (CPR);
* Aluminium soft ;
 
Type of insulation : 
 
E-glass, alkali free varnish-impregnated
Type of varnish for impregnation :
• polyurethane (TI 155);
• polyesterimide (TI 180);
• epoxy (TI 155);
• epoxy B-stage (TI 155);
 
Insulation options : 
• 1 or 2 layers tangentially lapped;
• 2 layers cross lapped;
• Insulation increase to IEC 60317-0-4;
 
Standards :
IEC 60317-31
IEC 60317-32
Customer Specification
 
Standard range of dimensions (Aluminium) :
cross-section(mm2) : 5 to 120;
width(mm) : 400 to 2000;
thickness(mm) : 200 to 600;
ratio w/t : <10;
 
Specifications:
CLASS : 155° : IEC 60317 -48/IS 13730-48
CLASS : 180° : IEC 60317 -49/IS 13730-49
CLASS : 200° : IEC 60317 -50/IS 13730-50
As per Customer Specification.
 
Applications :
• Power generators
• Traction motors

Detailed Photos