5052h32/H36 Aluminum Automotive Sheet for Car Body Outer

• Application: Transportation Tools, Automotive
• Certification: ISO9001, JIS, GB, EN
• Technique: Hot Rolled/Cast Rolled
• Grade: 5000 Series/3000 Series/5000 Series
• Temper: H14/H16/H24/H26/H38/H32/H36
• Surface Treatment: Anodic Oxidation/Mill Finish
• Model NO.: 5052H32/H36
• Alloy: Alloy/Non-Alloy
• Transport Package: Export Standard Wooden Case
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7606125900
• Production Capacity: 25000mt/Month

Product Description

5052H32/H36 Aluminum Automotive Sheet For Car Body Outer 

Chalco  focuses on the research and development and production of high-end aluminum alloy materials, providing customers with a variety of product solutions, Henan chalco can provide 3003,5052,aluminium alloy wide sheet products suitable for proof and side wall of Van Ttrailer.

The production of car body, especially the production of all kinds of manned vehicle body, is the quintessence of the automobile industry. The body building almost takes up 30% of the total investment of the automobile manufacturing company. The quality of the body is 30% of the total mass, and the reduction of its quality plays a vital role in reducing the quality of the vehicle.

The Three Advantages of Chalco's trailer Aluminium Sheet:

Large size:Max.width reaches 2650mm and the length ≥ 10000mm

High Uniformity:annealed by continuous heat treatment line, and the properties dfferences of the same coil and between coils are small.

Precise dimension and excellent flatness: dimension and flatness meet EN/ASTM standard

Chemical Composition

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Standard
3003	0.60	0.70	0.05-0.2	1.0-1.5	-	-	0.10	-	EN/ASTM
3004	0.30	0.70	0.25	1.0-1.5	0.8-1.3	-	0.25	-
5052	0.25	0.40	0.10	0.10	2.2-2.8	0.15-0.35	0.10	-

 Specification

Roof Plate
Alloy	Temper	Thickness (mm)	Width (mm)	Length (mm)
3003	H14/H16 /H24/H26	0.2-3.5	2000-2650	≥10000
5052	H32/H34	0.2-3.5	2000-2650	≥10000

 

Side Walls
Alloy	Temper	Thickness (mm)	Width (mm)	Length (mm)
3004	H36/H38	0.2-3.5	2000-2650	≥10000
5052	H32/H34	0.2-3.5	2000-2650	≥10000

Mechanical Properties

Alloy	Temper		Rp0.2(Mpa) Yield Strength	Rm(Mpa) Tensile Strength	(%) Elongation	Stangard
3003	H14		≥115	140-180	≥3	ASTM
	H24
	H16		≥145	165-205	≥3
	H26
3004	H38		≥215	≥260	≥2
5052	H32		≥160	215-265	≥4
	H36		≥200	255-305	≥2