Customization: | Available |
---|---|
Type: | Transport Aluminium Profile, Industrial Aluminium Profile, Structural Material of Railway Vehicle |
Shape: | Square/Round/Flat/or as Customers′ Drawing |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Aerospace & Aircraft | Hard alloy extruded shapes, hard alloy drawn seamless tube, hard alloy cold finished rod& bar |
Home furnishing | Furniture, Garden furniture, Shutters , Lighting, Self Brackets, Guides of curtains |
Energy | Photovoltaic panels and individual constructions Heaters, heating Air vents for air conditioning systems |
Vehicles | Automotive Industry Bodywork |
Electrical devices | Home Appliances Brush bodies |
Professional equipment | Commercial refrigerators Medical Equipment measuring Tools |
Advertising material | Advertising signs Stand |
Advertising signs Stand |
Bikes |
Alloy | Temper | Profile category |
5052,5754 | H112 | 1 |
5083 | H112 | 2 |
6005 ,6005A,6008 | T4,T6 | 1 |
6060 | T4,T5,T6 | 1 |
6063 | T1,T4,T5,T6 | 1 |
6101,6061,6082 | T6 | 1 |
6A01 | T4,T5 | 1 |
7003 | T5 | 2 |
7005,7020 | T6 | 2 |
7B05 | T4,T5,T6 | 2 |
Alloy | Chemical component(%) | ||||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Zr | Other | Al | |||
Each | Total | ||||||||||||
5052 | ≤0.25 | ≤0.40 | ≤0.10 | ≤0.10 | 2.2- 2.8 |
0.15-0.35 | ≤0.10 | - | - | - | ≤0.05 | ≤0.15 | Remain |
5754 | ≤0.40 | ≤0.40 | ≤0.10 | ≤0.50 | 2.6- 3.6 |
≤0.30 | ≤0.20 | Mn+Cr:0.10-0.60 | ≤0.15 | - | ≤0.05 | ≤0.15 | Remain |
5083 | ≤0.40 | ≤0.40 | ≤0.10 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | ≤0.25 | - | ≤0.15 | - | ≤0.05 | ≤0.15 | Remain |
6008 | 0.5-0.9 | ≤0.35 | ≤0.30 | ≤0.30 | 0.40-0.7 | ≤0.30 | ≤0.20 | V: 0.05-0.20 |
≤0.10 | - | ≤0.05 | ≤0.15 | Remain |
6005 | 0.6-0.9 | ≤0.35 | ≤0.10 | ≤0.10 | 0.40-0.6 | ≤0.10 | ≤0.10 | - | - | ≤0.10 | ≤0.05 | ≤0.15 | Remain |
6005A | 0.5-0.9 | ≤0.35 | ≤0.30 | ≤0.50 | 0.40-0.7 | ≤0.30 | ≤0.20 | Mn+Cr:0.12-0.50 | ≤0.10 | - | ≤0.05 | ≤0.15 | Remain |
6061 | 0.40-0.8 | ≤0.7 | 0.15-0.40 | ≤0.15 | 0.8-1.2 | 0.04-0.35 | ≤0.25 | - | ≤0.15 | - | ≤0.05 | ≤0.15 | Remain |
6082 | 0.7- 1.3 |
≤0.50 | ≤0.10 | 0.40-1.0 | 0.6-1.2 | ≤0.25 | ≤0.20 | - | ≤0.10 | - | ≤0.05 | ≤0.15 | Remain |
6063 | 0.20-0.6 | ≤0.35 | ≤0.10 | ≤0.10 | 0.45-0.9 | ≤0.10 | ≤0.10 | ≤0.10 | - | ≤0.05 | ≤0.15 | Remain | |
6060 | 0.30-0.6 | 0.10-0.30 | ≤0.10 | ≤0.10 | 0.35-0.6 | ≤0.05 | ≤0.15 | - | ≤0.10 | - | ≤0.05 | ≤0.15 | Remain |
6101 | 0.30-0.7 | ≤0.50 | ≤0.10 | ≤0.03 | 0.35-0.8 | ≤0.03 | ≤0.10 | B:0.06 | - | - | ≤0.03 | ≤0.10 | Remain |
7003 | ≤0.30 | ≤0.35 | ≤0.20 | ≤0.30 | 0.5-1.0 | ≤0.20 | 5.0-6.5 | - | ≤0.20 | 0.05-0.25 | ≤0.05 | ≤0.15 | Remain |
7005 | ≤0.35 | ≤0.40 | ≤0.10 | 0.20-0.7 | 1.0-1.8 | 0.06-0.20 | 4.0-5.0 | - | 0.01-0.06 | 0.08-0.20 | ≤0.05 | ≤0.15 | Remain |
7020 | ≤0.35 | ≤0.40 | ≤0.20 | 0.05-0.50 | 1.0-1.4 | 0.10-0.35 | 4.0-5.0 | Zr+Ti 0.08-0.25 |
- | 0.08-0.20 | ≤0.05 | ≤0.15 | Remain |
Curved surface chord length | Allowable curved surface gap on below chord length | |
Any 25mm chord length | All the chord length( W) | |
≤25 | --- | ≤0.13 |
>25 | ≤0.13 | ≤0.6% X W |
Circumscribed circle diameter | Curve contour deviation C |
≤30 | ≤0.30 |
>30-60 | ≤0.50 |
>60-90 | ≤ 0.70 |
>90-120 | ≤1.0 |
>120-150 | ≤1.2 |
>150-200 | ≤1.5 |
>200-250 | ≤2.0 |
>250-300 | ≤2.5 |
>300-400 | ≤3.0 |
>400-500 | ≤3.5 |
>500-1000 | ≤4.0 |
Max width of Aluminium profile mm | Cutting slant angle |
≤ 150.00 | ≤ 3° |
> 150.00-400.00 | ≤ 2° |
>400.00 | ≤ 1° |
Alloy | Temper | Aluminum profile mode | Wall thickness (mm) | Cross sectional area cm² |
Mechanical Property | BH(Brinell Hardness) HBW |
||||
Tensile Strength (MPa) |
Yield Strength (MPa) |
Elongation (%) | ||||||||
A | A50mm | |||||||||
Not less than | ||||||||||
5052 | H112 | - | - | - | 170 | 70 | 15 | 13 | 47 | |
5754 | H112 | - | ≤25.00 | - | 180 | 80 | 14 | 12 | 47 | |
5083 | H112 | - | - | - | 270 | 140 | 12 | 10 | 70 | |
6005 6005A |
T4 | solid | ≤25.00 | - | 180 | 90 | 15 | 13 | 50 | |
hollow | ≤10.00 | - | 180 | 90 | 15 | 13 | 50 | |||
T6 | solid | ≤5.00 | - | 270 | 225 | - | 6 | 90 | ||
>5.00-10.00 | - | 260 | 215 | - | 6 | 85 | ||||
>10.00-50.00 | - | 250 | 200 | 8 | 6 | 85 | ||||
hollow | ≤5.00 | - | 255 | 215 | - | 6 | 85 | |||
>5.00-15.00 | - | 250 | 200 | 8 | 6 | 85 | ||||
>15.00-25.00 | - | 250 | 200 | 8 | - | - | ||||
6008 | T4 | solid | ≤10.00 | - | 180 | 90 | 15 | 13 | 50 | |
hollow | ≤10.00 | - | 180 | 90 | 15 | 13 | 50 | |||
T6 | solid | ≤5.00 | - | 270 | 225 | 8 | 6 | 90 | ||
>5.00-10.00 | - | 260 | 215 | 8 | 6 | 85 | ||||
hollow | ≤5.00 | - | 255 | 215 | 8 | 6 | 85 | |||
>5.00-10.00 | - | 250 | 200 | 8 | 6 | 85 | ||||
6060 | T4 | - | ≤25.00 | - | 120 | 60 | 16 | 14 | 50 | |
T5 | - | ≤5.00 | - | 160 | 120 | - | 6 | 60 | ||
>5.00-25.00 | - | 140 | 100 | 8 | 6 | 60 | ||||
T6 | - | ≤3.00 | - | 190 | 150 | - | 6 | 70 | ||
>3.00-25.00 | - | 170 | 140 | 8 | 6 | 70 | ||||
6061 | T6 | - | ≤5.00 | - | 260 | 240 | - | 7 | 95 | |
>5.00-25.00 | - | 260 | 240 | 10 | 8 | 95 | ||||
6063 | T1 | - | ≤12.00 | - | 120 | 60 | - | 12 | - | |
>12.00-25.00 | - | 110 | 55 | - | 12 | - | ||||
T4 | - | ≤25.00 | - | 130 | 65 | 14 | 12 | 50 | ||
T5 | - | ≤3.00 | - | 175 | 130 | - | 6 | 65 | ||
>3.00-25.00 | - | 160 | 110 | 7 | 5 | 65 | ||||
T6 | - | ≤10.00 | - | 215 | 170 | - | 6 | 75 | ||
>10.00-25.00 | - | 195 | 160 | 8 | 6 | 75 | ||||
6082 | T6 | - | ≤5.00 | - | 290 | 250 | - | 6 | 95 | |
>5.00-50.00 | - | 310 | 260 | 10 | 8 | 95 | ||||
6106 | T6 | - | ≤10.00 | - | 250 | 200 | 8 | 6 | 85 | |
6A01 | T4 | solid | ≤25.00 | - | 160 | 70 | 15 | 13 | - | |
hollow | ≤10.00 | - | 160 | 70 | 15 | 13 | - | |||
T5 | - | ≤6.00 | - | 245 | 205 | - | 8 | - | ||
>6.00-12.00 | - | 225 | 175 | - | 8 | - | ||||
7003 | T5 | - | ≤25.00 | - | 310 | 260 | 10 | 8 | - | |
7005 | T6 | - | ≤40.00 | - | 350 | 290 | 10 | 8 | 110 | |
7020 | T6 | - | ≤40.00 | - | 350 | 290 | 10 | 8 | 110 | |
7B05 | T4 | - | - | ≤200cm² | 315 | 195 | - | 11 | - | |
T5 | - | - | ≤200cm² | 325 | 245 | - | 10 | - | ||
T6 | - | - | ≤200cm² | 335 | 275 | - | 10 | - |
Alloy | Temper | Wall Thickness (mm) |
Tensile mechanical properties Result at room temperature | |
Tensile Strength (MPa) |
Yield Strength (MPa) |
|||
Not less than | ||||
5083 | H112 | ≤ 15.00 | 270 | 125 |
> 15.00 | 270 | 125 | ||
5754 | H112 | ≤ 15.00 | 180 | 80 |
6005 | T6 | ≤ 15.00 | 160 | 90 |
6005A | T6 | ≤ 15.00 | 165 | 115 |
6008 | T6 | ≤ 15.00 | 165 | 115 |
6061 | T6 | ≤ 15.00 | 175 | 115 |
> 15.00 | 165 | 115 | ||
6063 | T6 | ≤ 15.00 | 110 | 65 |
> 15.00 | 85 | 55 | ||
6082 | T6 | ≤ 15.00 | 185 | 125 |
> 15.00 | 165 | 115 | ||
6106 | T6 | ≤ 15.00 | 160 | 95 |
The profile Type | Wall thickness(mm) | The bending radius(mm) |
Hollow Profile | ≤ 10 | 4 times of wall thickness |
> 10 | 5 times of wall thickness | |
Solid profile | ≤ 5 | 3 times of wall thickness |
> 5-10 | 4 times of wall thickness | |
> 10 | 5 times of wall thickness |