Tongue and Groove Face Aluminum Flange

• Customization: Available
• Type: Transport Aluminium Profile, Industrial Aluminium Profile, Marine/Shipping
• Shape: Tongue and Groove
• Model NO.: 5086/6061
• Grade: 5000 Series 6000 Series
• Temper: H32/T6
• Alloy: Alloy
• Surface Finishing: PVDF/PE Coating,Anodized.
• Alloying Ingredient: 5086/6061
• Certification: SONCAP, ISO, BV/SGS/CNAS/Ma
• Polished Aluminum Profile: Mechanical Polishing
• Color: to Customized
• Transport Package: Export Standard Wooden Pallet or as Your Requsts
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7604210000
• Production Capacity: 5000mt/Month

Product Description

Tongue and Groove Face Aluminum Flange
We offer stock for different aluminum fittings, 5086 H32 & 6061 T6 Aluminum Pipe Fittings,aluminum elbow (Radius 90's, Long Radius 45's, Long Radius 180's, Short Radius 90's, Short Radius 180's), Tees (Straight and Reducing) Tees and Crosses (Straight and Reducing), Aluminum Caps,Aluminum couplings(straight and reducing), aluminum flanges. We also offer custom manufactured fittings, flanges and pipes.

 5086 H32
5086 is the preferred hull material for small aluminium boats or larger yachts. Its high strength and good corrosion resistance make it an excellent match for yachting.
5086 has a tendency to undergo stress corrosion cracking and is not used much in aircraft construction as a result.
5086 has been used in vehicle armor, notably in the M113 Armored Personnel Carrier and M2 Bradley Infantry fighting vehicle.

6061-T6
T6 temper 6061 has an ultimate tensile strength of at least 42,000 psi (300 MPa) and yield strength of at least 35,000 psi (241 MPa).  More typical values are 45,000 psi (310 MPa) and 40,000 psi (275 MPa), respectively. In thicknesses of 0.250 inch (6.35 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties. The typical value for thermal conductivity for 6061-T6 at 80°C is around 152 W/m K. A material data sheet defines the fatigue limit under cyclic load as 14,000 psi (100 MPa) for 500,000,000 completely reversed cycles using a standard RR Moore test machine and specimen. Note that aluminum does not exhibit a well defined "knee" on its S-n graph, so there is some debate as to how many cycles equates to "infinite life". Also note the actual value of fatigue limit for an application can be dramatically affected by the conventional de-rating factors
of loading, gradient, and surface finish.
 

Tongue and Groove Face Aluminum Flange
Nominal  Dimension  DN	Nominal Pressure  PN 40 and PN 63
	W	X	Y	Z	f1	f2
10	24	34	35	23	4.0	3.0
15	29	39	40	28	4.0	3.0
20	36	50	51	35	4.0	3.0
25	43	57	58	42	4.0	3.0
32	51	65	66	50	4.0	3.0
40	61	75	76	60	4.0	3.0
50	73	87	88	72	4.0	3.0
65	95	109	110	94	4.0	3.0
80	106	120	121	105	4.0	3.0
100	129	149	150	128	4.5	3.5
125	155	175	176	154	4.5	3.5
150	183	203	204	182	4.5	3.5
175	213	233	234	212	4.5	3.5
200	239	259	260	238	4.5	3.5
225	266	286	287	265	4.5	3.5
250	292	321	313	291	4.5	3.5
300	343	363	364	342	4.5	3.5
350	395	421	422	394	5.0	4.0
400	447	473	474	446	5.0	4.0
450	497	523	524	496	5.0	4.0
500	549	575	576	548	5.0	4.0
600	649	675	676	648	5.0	4.0