Fuel Tank 5052 Aluminum Alloy

• Customization: Available
• Color: Silver
• Application: Transportation Tools, Door & Window, Decorations
• Model NO.: 5052
• Certification: ISO9001, ASTM, JIS, GB, EN
• Technique: Extruded
• Grade: 5000 Series
• Temper: O - H112
• Surface Treatment: Powder Coating
• Alloy: Alloy
• Elongation: More Than 10%
• Transport Package: Export Standard Wooden Pallet
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7606125900
• Production Capacity: 20000mt/Month

Product Description

Fuel tank 5052 aluminum alloy


 

1 The Introduction of Fuel tank 5052 aluminum alloy
The Fuel tank 5052 aluminum alloy is AL-Mg series alloy aluminum sheet plate, which is the most widely used anti-rust aluminum alloy. The Fuel tank 5052 aluminum alloy has high strength, especially fatigue strength, high plasticity and corrosion resistance, and goodweldability.
With the mass production of tank trucks, problems such as how to save energy, improve functions, save materials and reduce costs have arisen. Take the tanker fuel tank as an example,if the fuel tank plate uses a good material, so that long-term use is to save materials. Moreover, the price of theFuel tank 5052 aluminum alloyhas a higher advantage than other materials. Therefore, the Fuel tank 5052 aluminum alloy is energy-saving and environmentally friendly,and can be used for a long time.

2 The Product specification of Fuel tank 5052 aluminum alloy
* Alloy: 5052
* Material temper: O, H111, H112, H114, H116, H32, etc;
* Thickness (mm): 4-8mm, the normal thickness are generally: 5, 6, 7, 8mm;
* Width (mm): 1500mm-3450mm
The typical width of tanker body/Cylinder and Bulkhead/Wash Board: 1500/1600/1800/2000/2200/2400mm
* Length (mm): 500-16000mm
Typical length: 5500/5750/6000/7500/7850/8600/11800mm
* Production standards: GB/T 3880, EN14286, EN485, ASTM B209, or according to customer's special requirements
* Applicable fields: fuel tank materials, molds, anodizing materials, trolley boxes, 3C products, automobiles, silos, etc.
* Appearance Parameter

Type	Standard Plate	High Class Plate	Bright Plate	Mirror Plate
Roughness Ra/μm	0.5-0.8	0.3-0.5	0.1-0.3	≤0.04
Product Description	Smooth Surface Defect deepness <Minus Tolerances of Thickness	Fine and Smooth surface No or only very little colour aberration and chatters	Bright,fine and smooth surface No colour aberration and chatters	Mirror reflective surface Reflecance ≥86%
Applicable Standards	GB/T 3880	EN14286/ASTM B209 EN485 Or depend on Customer's special requirements	EN14286/ASTM B209 Or depend on Customer's special requirements	EN14286/ASTM B209 Or depend on Customer's special requirements
Application	Use directly or after brashing Cylinder, Head, Bulkhead, Wash Board	Directly Use Cylinder, Head, Bulkhead, Wash Board	Directly Use Cylinder, Head,	Directly Use Cylinder, Head,

3 The Chemical composition and Mechanical properties of Fuel tank 5052 aluminum alloy
1) The Chemical composition of Fuel tank 5052 aluminum alloy

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Other		AL
										single	total
5052	0.25	0.40	0.10	0.10	2.2 -2.8	0.15 -0.35	-	0.10	-	0.05	0.15	Remainder

2)The Mechanical properties of Fuel tank 5052 aluminum alloy

Alloy	Temper	Thickness (mm)	Mechanical properties
			Tensile Strength(Mpa)	Yield strength (Mpa)	Elongation (%)	Minimum Bending Radius of 180 Degree
			standard value	standard value	A50
			Not less than
5052	O/H111	4-8mm	170-215	≥65	≥18	---
5052	H32	4-8mm	210-260	≥130	≥10	---

4 The Product features of Fuel tank 5052 aluminum alloy
1) The Fuel tank 5052 aluminum alloy has good corrosion resistance;
2) Fuel tank 5052 aluminum alloyhas Excellent weldability ;
3) Fuel tank 5052 aluminum alloyhas better cold workability
4) The Fuel tank 5052 aluminum alloy has medium strength.

5 The Application of Fuel tank 5052 aluminum alloy
Fuel tank 5052 aluminum alloy is mainly used to manufacture fuel tank for tank trucks, and also can be used to manufacture molds, silos, etc.