Bimetallic Stainless Steel to Steel Plate Sheet

• Customization: Available
• Type: Steel Plate
• Application: Air Condition or Refrigerator, Water Tube, Oil Cooler Pipe, Pressure Equipment
• Model NO.: Q235, Q345, Q245R, Q345R,
• Material: Stainless Steel -Steel
• Shape: Plate
• Alloy: Non-alloy
• Color: Any
• Standard: GB/T
• Cladding Rate: 100%
• Base Plate: Q235 ,Q345,Q245r,Q345r,......
• Cladding Plate Thickness: Less Than 200mm
• Bade Plate Thickness: Less Than 200mm
• Transport Package: Export Standard Wooden Pallet
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7419999100
• Production Capacity: 10000mt/Month

Product Description

                           Bimetallic Stainless Steel To Steel Plate Sheet

1.Stainless steel: All in the air or all kinds of gases, in water or all kinds of acid, alkali, salt water solution with high chemical stability will not rust or corrosion of steel, all become stainless steel.
According to the chemical stability of stainless steel in different corrosive media, stainless steel can be divided into:

A. ordinary stainless steel -- steel that resists corrosion in air.
B. stainless acid resistant steel - resistant to corrosion in strongly corrosive acid solutions.

Stainless steel can be divided into ferritic stainless steel, martensitic stainless steel and austenitic stainless steel according to their microstructure after normalization. In addition, there are intermediate type stainless steels, such as martensitic ferrite stainless steel.

2.Carbon steel    carbon steel is an iron-carbon alloy, but also contains a small number of beneficial elements manganese and silicon, as well as impurity elements sulfur and phosphorus. Carbon steel is divided into low carbon steel, medium carbon steel and high carbon steel.

3.Low-alloy steel is a kind of low-alloy steel which adds a certain amount of alloy elements (less than 5%) on the basis of carbon steel to improve the strength of the steel and ensure its plasticity and toughness, or to make the steel have some special properties (such as low temperature resistance, high temperature resistance or corrosion resistance).
4. Alloy steel alloy steel is based on carbon steel into one or more elements (its weight is more than 5%) in order to significantly improve the strength, toughness and wear resistance of steel, and has good hardenability.
Structural stainless steel, carbon steel, low alloy steel and alloy steel materials are often used in explosive welding process, and mainly plate, followed by pipe and bar.
Bimetallic Stainless Steel To Steel Plate Sheet, the composite plate composed of stainless steel plate and steel (carbon steel, low alloy steel or alloy steel) plate is made of stainless steel-steel composite plate. This kind of composite plate has both the characteristics of stainless steel and ordinary steel. This composite board is of great significance for saving alloy resources, reducing material consumption and reducing costs.
Manufacturing method of stainless steel steel composite plate:
A. butt welding method B. casting C. rolling D. explosive welding E. explosive welding + rolling method
Clad steel plates are widely used in pressure equipment, chemical equipment, oil refining equipment and synthetic industrial equipment. The thickness of the coating is usually 5%-20% of a total thickness. The material of carbon steel layer of composite steel plate is A515, A515, A204, A387, A32, A36 and so on. The coating materials are AISI 405, 410, 410S, 429, 430, 304, 309, 316 and 321, as well as nickel alloy 200, Inco nickel 600 and Monel 400.
 

Physical property of Bimetallic Stainless Steel To Steel Plate Sheet
No	σt	σb	σs	δ/ %	Inside and outside bend degree/(°)	Ak/(J.cm^-2)
1	495	561	520	18	180	63.7
2	491	537	505	19	180	85.3
Average	493	549	513	18.5	180	83.3

Petroleum refineries are one of the sectors with the largest volume of composite materials, mainly used in vacuum towers, distillation towers and various heat exchangers. Chemical equipment mainly includes various reaction towers, precipitation tanks, agitators, desalination equipment and various types of heat exchangers. In addition, a large number of stainless steel-steel composite boards are used in synthetic fiber manufacturing and paper industry, such as dyeing vats, washing towers and autoclaves, evaporators in caustic soda and salt industry.


In addition, the three-layer stainless steel-steel-stainless steel composite plate sheet is widely used in kitchen utensils, kitchen machinery, swimming pool, sink, water heater and building materials because of its beautiful metallic luster, excellent corrosion resistance, excellent adhesion resistance, excellent heat conductivity and good processability.
 

Specs of Bimetallic Stainless Steel To Steel Plate Sheet
Base plate	Q235,Q345, Q245R,Q345R, 15CrMoR,09MnNiDr,08A1......
Cladding plate	AISI 405,410,410S,429,430,304,309,316,321,06Cr13, 06Cr13A1, 022Cr17Ti, 06Cr19Ni10, 06Cr18Ni11Ti
Standard	GBT 8165-2008
Cladding plate thickness	≤200mm
Bade plate thickness	≤200mm
Length	≤12000mm
Width	≤3500mm

 

Bimetallic Stainless Steel To Steel Plate Sheet
Product Dimension (mm)	Product Standard	Materials		Final usage
		Base plate	Cladding plate
1~20/2~200× <3500×12000	NB/T47002.1-2009 GB/T8165-2008 ASME,ASTM Standard	Q245R Q345R 13MnNiMoR Q345A Q345B Q345C Q235A Q235B Q235C 16Mn 16MnD 16MnDR 14Cr1MoR 15CrMoR 14Cr1Mo 15CrMo	06Cr19Ni10(S30408)	General chemical equipment, atomic energy industrial equipment, suitable for manufacturing acid conveying pipes, containers, etc.
			06Cr19Ni10N(S30451)	Nitrogen addition improves the strength, pitting corrosion resistance, crevice corrosion and intergranular corrosion of the steel, and high nickel content leads to low work hardening rate.
			022Cr19Ni10(S30403)	Similar to S30408 and similar in function.
			06Cr18Ni11Ti(S32168)	Suitable for food, chemical, pharmaceutical and atomic energy industries, suitable for manufacturing acid-resistant containers, pipes, heat exchangers and acid-resistant equipment, not suitable for use in the presence of oxides
			06Cr17Ni12Mo2(S31608)	Suitable for manufacturing chemical, fertilizer, petrochemical, printing and dyeing, atomic energy and other industrial equipment, containers, pipes, heat exchangers, etc.
			06Cr17Ni12Mo2Ti(S31668)
			022Cr17Ni12Mo2(S31603)	It is mainly used in chemical industry, chemical fertilizer plant, synthetic tower, pipeline, container, etc.
			06Cr17Ni12Mo2Ti(S31668)	It is widely used in chemical, petroleum, textile and papermaking equipment, pipes, containers, etc.
			022Cr19Ni5Mo3Si2N(S21953)	Chloride resistant stress corrosion cracking is good for water conservancy, refining, chemical industry, chemical fertilizer, etc. Papermaking, petroleum and other industries, especially for the manufacture of heat exchangers, condensers, etc.
			022Cr23Ni5Mo3N(S32205)
			06Crl3Al(S11348)	It is mainly used for making water vapor tolerant, ammonium bicarbonate mother liquor and high temperature sulfur oil corrosion. Components and equipment

Product features:

Low cost, high abrasion resistance, impact resistance and appropriate corrosion resistance, high yield strength, luxurious and beautiful surface, advanced composite process, high elongation, low work hardening rate of pure stainless steel, high thermal conductivity