1200 Aluminum Jacket for Pipe Insulation

• Customization: Available
• Color: Any
• Application: Transportation Tools, Glass Wall, Decorations, Insulation
• Model NO.: 1100/1200/3003/3105
• Technique: Hot Rolled
• Grade: 1000/3000 Series
• Temper: H12/H14/H16/ H24/ H26
• Surface Treatment: Mill Finish /Stucco/Flat /Embossed
• Alloy: Alloy
• Thickness: 0.4-1mm
• Width: 800-1500
• Length: as Requested
• Transport Package: Export Standard Wooden Pallet
• Specification: According to Customer Requirement
• Trademark: Chalco Aluminum
• Origin: Henan China
• HS Code: 7606119000
• Production Capacity: 10000mt/Month

Product Description

1200 aluminum jacket for pipe insulation 


1200 aluminum insulation jacketing roll coil is commercially pure aluminum, has high corrosion resistance with slightly higher strength than 1050/1060. The alloy also boasts high thermal conductivity and reflectivity, which is widely used for outside of China for pipe jacketing field. It has general fabrication and sheet metal work ability, very good atmospheric corrosion resistance.
 

Chemical Composition of 1200 aluminum insulation jacketing roll coil
Alloy	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	Others		Aluminum
										Each	Total
EN AW-1200	1.00		0.05	0.05	-	-	-	0.10	0.05	0.05	0.15	99.00

Physical Property of 12
Alloy EN AW 1200
Temper	Specified thickness mm		Rm MPa		Rp0.2 MPa		Elongation min. %		Bend radius^a		Hardness HBW^a
	over	Up to	Min.	Max.	Min.	Max.	A50mm	A	180°	90°
H14	0.5	1.5	95	135	75		4		0.5t	0t	31

Alloy: 1200
Temper: H14, H16, H24, H26
Thickness: 0.4mm--1.5mm
Standard width: 914mm, 1000mm, 1200mm, 1219mm
Surface: mill finish, stucco embossed(orange peel), corrugated
Inner diameter: 305mm, 405mm, 505mm, with paper core, or without core
Out diameter: According to coil weight and finish, most common coils length: 125m, 150m, 250m, 300m, 500m, 1000m,2540m
Surface lamination: color coated, kraft paper laminated, polysurlyn film laminated
Kraft paper thickness: about 0.1mm
Polysurlyn thickness: about 0.076mm (3mil)
Quality standard: ASTM B209, EN573-1
Quantity: have ready stock for most common thickness roll, small quantity order are acceptable.

 Application :

1. It can be used for the protection of pipes, fittings and equipment.
2. It can also be used for the jacketing of the equipment, instruments and tanks.